DigitalYacht iAIS or WLN10 or NavLink

Using iNavX with DigitalYacht iAIS or WLN10 or NavLink

Go to the device home screen
– Select “Settings” app > Select “Wi-Fi” > Set “Wi-Fi” to “ON” > Select “DY-iAIS-XXXX” or “DY-WLN10-XXXX

Launch iNavX
 – Select “TCP/IP NMEA Client” on the iNavX “Preferences” menu
– Enter the Host “
– Enter Port “2000
– Select “TCP” (Note: If iAIS or WLN10 configured for UDP, then select “UDP“)
– Set “Enable Waypoints” to “ON” to import and and navigate to active waypoint or route of the connected GPS receiver
– Set “Location Services” to “ON” If there is no GPS receiver connected to the iAIS or WLN10. This will allow iNavX to use the device “Location Services
– Set “AP Repeat” to “ON” in order to have NMEA data for the active waypoint sent to the WLN10 NMEA out while iNavX is running.
– Enable “Link
– Select “Save” button